For most users, the later maintenance and repair workshop of cement hollow brick machine is very troublesome and cumbersome, but we still have to do this work, because only after the later maintenance and repair of cement hollow brick machine can we ensure the quality and performance of the equipment, and the bearing, one of the more important components, needs to be disassembled and replaced regularly, However, there are strict operation specifications in the process of disassembly. If the disassembly is wrong, it is likely to fail to achieve the effect of maintenance and repair, but may lead to premature damage to the bearing. Today, I will explain to you how to disassemble the bearing of cement hollow brick machine.
First, when disassembling and washing, we should screw some outer ring extrusion screws around the shell, and then tighten these screws slowly and disassemble them slowly, which helps us to disassemble the outer ring slowly. For some bearings that protect the shell, for some reasons, we can use a press or slow knocking to disassemble, The press can also be used in the disassembled inner ring, but we need to pay attention to the fact that even if the inner ring of the bearing is stressed evenly, it will still lead to damage if we don't pay attention. In addition, because the manufacturers of cement hollow brick machines are different, the bearings installed inside will be different, and the disassembly and installation are also different, It is suggested that the disassembly and safety work be carried out under the guidance of the technicians of the cement hollow brick machine manufacturer.
