The double axis screw conveyor is commonly known as Jiaolong. The conveying principle of the double axis screw conveyor is that the rotating screw blades move the materials. The two rotating shafts rotate inward at the same time, which is conducive to the material conveying. The double axis screw conveyor is suitable for granular and powdery materials. The conveying forms can be horizontal, inclined, etc. the conveying distance of the double axis screw conveyor ranges from 2 meters to 80 meters, According to the actual demand, different forms of conveyor bodies can be produced. The transported materials do not rotate with the conveyor blades, and the weight of the materials and the friction resistance of the screw conveyor shell to the materials.
Double shaft screw conveyor is a screw conveyor with two rotating shafts welded with rotating blades respectively. Combine the two screw conveyors to form a double screw conveyor, which has the characteristics of strong conveying capacity, large conveying capacity and reducing the ground.
Structure of double screw conveyor
Spiral blades are welded on the rotating shaft of the screw conveyor. The surface types of the blades include solid surface type, belt surface type, blade surface type, etc. according to the different conveying materials. The spiral shaft of the double screw conveyor has thrust bearings at the end of the material movement direction to give the axial reaction of the screw along with the materials. When the body is long, the middle hanging bearing shall be added, and the rotation direction of the rotating shaft of the double screw conveyor, It determines the conveying direction of materials. Generally, the rotating blades of double screw conveyor are designed according to single conveying. When conveying in the reverse direction, the service life of the conveyor will be greatly reduced. With technology, the screw conveyor can be 12 meters alone without lifting bearings and blocking materials. It is especially suitable for petroleum sludge transportation. The company solemnly promises that once the products are sold, the whole machine and accessories will be guaranteed for one year!
Installation sequence of double screw conveyor
Drop the machine, weld the feeding port and discharge port, install the sealing sleeve, and fix the cover plates at both ends.
The guide rod and the shear rubber spring are welded or fixed on the groove body and underframe with screws.
Install the vibration isolation spring and the lower seat plate of the spring under the underframe.
Pad up and level the underframe.
Support the tank on the underframe and level it.
Install the transmission shaft assembly and motor, and weld the excitation plate.
Measure the elevation of each vibration isolation spring support point, or draw a horizontal line on the nearby wall.







